In this short post I will show you a very useful accessory – Rigol DL3021A 4mm Banana Jack Adapter. The stock configuration of the Rigol DL3021A uses screw terminals which are quite painful to use and are not compatible with 4mm banana plugs of course.…
Recently I have built a Bambu Lab X1C Fume Filtering System which is based on Xiaomi air purifier (link) . It came out that this air purifier works perfectly – there’s zero smell & PM2.5 sensor shows the value of 0 (when printing with ABS…
The filter that came with the Bambu Lab X1C 3D printer is not great – to be honest it looks like it is not working at all. Recently I had to print many parts with ABS. The fumes generated from ABS smell horrible & are…
I’ve got inspired by the Adam Savage “One day builds” series which is being published on Tested (YouTube channel). Because of that , I will start publishing short posts describing my “one day projects” from now. Each one of them will be tagged with [#One…
Below I will present a very useful tool in every electronics lab – a 3D Printed PCB Vise. Often you will need to hold the printed circuit board during soldering or testing. When you have soldered big components that are sticking out from the PCB…