Hi everyone, and welcome to my website!
This website is mostly for documenting stuff that I do on my own in free time. Most of the posts are going to have something to do with: EE ( Analog, Digital, RF ), Mechanical Design, Software and other stuff like that. Sometimes I will aslo write Multidisciplinary posts that will have something in comon with each of these categories.
Always feel free to leave any comment, question and feedback in the posts down below.
3D Printed PCB Vise
Below I will present a very useful tool in every electronics lab – a 3D Printed PCB Vise. Often you will need to hold the printed circuit board during soldering or testing. When you have soldered big components that are sticking out from the PCB…
RAPTOR XLS 360 – My new 3D printer
For a long time I wanted to build a larger 3D printer “in my own way” which wouldn’t cost me very much – I mean that cost of it shouldn’t cause my wallet to “implode”. I haven’t found any 3D printer that is available on…
T-REX 300 – A completely new printer based on a old one
The T-REX 300 3D printer is based on the design of the Profabb Gate XL printer . The Gate LE is a very old design which was made a few years ago when the rep-rap printers were getting popular in my country. It required many…
Mini Sumo Robot – Bullet XT
Mini Sumo Robot Bullet XT took part in several competitions but due to one mistake in mechanical design it was too easy to defeat it during fight on dohyo. But you know, I don’t give up so easily – I’m planning to try out new…