Mechanical Design Projects
As an part of the experiment, I decided to try to electroplate “non-metal” objects. This process is quite poorly described on the Internet. You can copper-plate with this method almost anything (insects, wood, plastics, dried plants and so on).The first thing that has came to…
Below I will present a very useful tool in every electronics lab – a 3D Printed PCB Vise. Often you will need to hold the printed circuit board during soldering or testing. When you have soldered big components that are sticking out from the PCB…
For a long time I wanted to build a larger 3D printer “in my own way” which wouldn’t cost me very much – I mean that cost of it shouldn’t cause my wallet to “implode”. I haven’t found any 3D printer that is available on…
The T-REX 300 3D printer is based on the design of the Profabb Gate XL printer . The Gate LE is a very old design which was made a few years ago when the rep-rap printers were getting popular in my country. It required many…
I have thousands of different electronic components placed somewhere in the drawer in my LAB. Finding a particular part in boxes with mixed SMD tapes is a total nightmare, it is even worse when you need to find a particular capacitor (as you know they…
